Semua produk
Kontak Person :
lei
Nomor telepon :
13266828705
kata kunci [ extrusion polyethylene granules ] pertandingan 48 Produk.
Petrothene® Ga50224 LyondellBasell LLDPE
| Kepadatan (23°C): | 0,918 gram/cm³ |
|---|---|
| Laju Aliran Massa Leleh (MFR) (190°C/2,16 kg): | 2 g/10 menit |
| Metode Pengolahan: | Ekstrusi Film Pemeran Film Tiup |
Petrothene® GA502023 LyondellBasell LLDPE
| Kepadatan (23°C): | 0,918 gram/cm³ |
|---|---|
| Laju Aliran Massa Leleh (MFR) (190°C/2,16 kg): | 2 g/10 menit |
| Metode Pengolahan: | Ekstrusi Film Pemeran Film Tiup |
Purell 3040D LyondellBasell LDPE
| Kepadatan: | 0,928 gram/cm³ |
|---|---|
| Laju aliran leleh (MFR) (190°C/2,16 kg): | 0,5 g/10 mnt |
| Metode pemrosesan: | Ekstrusi, film tiup |
Petrothene GA502022 LyondellBasell LLDPE
| Kepadatan (23°C): | 0,918 gram/cm³ |
|---|---|
| Laju Aliran Massa Leleh (MFR) (190°C/2,16 kg): | 2 g/10 menit |
| Metode Pengolahan: | Ekstrusi Film Pemeran Film Tiup |
Petrothene® NA143063 LyondellBasell LDPE
| Kepadatan: | 0,922 gram/cm³ |
|---|---|
| Laju aliran leleh (MFR) (190°C/2,16 kg): | 2 g/10 menit |
| Metode pemrosesan: | Ekstrusi, film tiup |
Biobased Polyethylene LDPE Partikel Bahan tebu Braskem Green PE SEB853/72
| Kepadatan (23°C): | 0,923 gram/cm³ |
|---|---|
| Laju Aliran Massa Leleh (MFR) (190°C/2,16 kg): | 2,7 g/10 mnt |
| Temperatur cetakan: | 170 -190 °C |
HI-ZEXTM 3300f Prime Polymer
| Density: | 0.95 g/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg): | 1.1 g/10 min |
| Shore Hardness （D): | 62 |
Hi-ZEXTM 7000f Prime Polymer
| Density: | 0.952 g/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg): | 0.04 g/10 min |
| Shore Hardness （D): | 64 |
Hdpe Hi-ZexTM 5100e Prime Polymer
| Density: | 0.958 g/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg): | 0.98 g/10 min |
| Kemasan rincian: | 25 ton dalam kontainer 40 kaki |
Hiden M690 Yuhwa Korea
| Density: | 0.962 g/cm³ |
|---|---|
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg): | 12 g/10 min |
| Rockwell Hardness (R-Scale): | 51 |